General Disclaimers

- DJI Action 2 is constructed of an aluminum alloy that is prone to fast heat conduction and dissipation. Given that Action 2 supports 4K/120fps video, it’s normal for the camera unit to get hot when recording.
DJI Action 2 has a built-in temperature control system. Action 2 will automatically stop recording when the camera temperature reaches the set value. There are two set values for the Auto-Stop Rec Temp (Standard: 48℃ and High: 53℃). You can adjust the settings according to your usage habits and preferences.
(* When using the Camera Unit separately, the Auto-Stop Rec Temp refers to the frame temperature. When connected with the Front Touchscreen Module or Power Module, the Auto-Stop Rec Temp refers to the connected module’s frame temperature. There may be a difference of 1 to 2℃).
To lower the rate of temperature increase, you can reduce the video resolution. Due to local regulations, some regions are only able to select the standard 48 ℃ Auto-Stop Rec Temp.
You can also use the DJI Action 2 Magnetic Protective Case, which helps reduce surface temperature to optimize video recording by increasing recording length under normal conditions.
- DJI Mimo is required for activation when using DJI Action 2 for the first time.
- When the Camera Unit is connected with the Front Touchscreen Module, DJI Action 2 supports 4-mic Matrix Stereo except when recording 4K/100fps, 4K/120fps, 1080p/120fps, 4K 4x slow motion, or 1080p 8x slow motion video. When the Front Touchscreen Module's screen shows the active shooting display, audio recording is only supported via the Camera Unit's built-in microphone.
- DJI Action 2 supports voice control except when recording 4K/100fps, 4K/120fps, 1080p/240fps, 4K 4x slow motion, or 1080p 8x slow motion video with the Camera Unit connected to the Front Touchscreen Module.
- DJI Action 2 Dual-Screen Combo includes DJI Action 2 Camera Unit × 1, Front Touchscreen Module × 1, Magnetic Lanyard × 1, Magnetic Ball-Joint Adapter Mount × 1, Magnetic Adapter Mount × 1, Power Cable × 1. DJI Action 2 Power Combo includes DJI Action 2 Camera Unit × 1, Power Module × 1, Magnetic Lanyard × 1, Magnetic Adapter Mount × 1, Power Cable × 1. Accessories not included in the combo should be purchased separately.
- Do not attach the DJI Action 2 Camera Unit to the Front Touchscreen Module or Power Module when there is any dust or water on or in the expansion ports. Doing so may cause the Camera Unit to corrode or short-circuit.
- All parameter values listed on this page were measured using a production model of DJI Action 2 in a controlled test environment. Actual results may vary depending on the environment, usage method, and firmware version.
- All videos and pictures on this page were shot in strict compliance with relevant local laws and regulations.

j9国际站

玩轉全場